The McHugh Turret Roof Cap Photos & Details Page Updated 4-1-2007 |
![]() |
Company Profile |
![]() |
Roof Caps |
![]() |
Chimney Caps |
![]() |
Scuppers |
![]() |
Gutters |
![]() |
Shipping | Contact Info |
.
These solid 20oz copper turret and gazebo roof caps were custom made for a clients named Brent and Laura McHugh in Ashton Missouri. They are 18' 9" wide 8 sided roof with 16/12 pitch, made a little over the small size at 2' 6" wide to an 18/12 pitch that graduated to a steeple pitch for the top support cone. They requested the Merlin and the Avalon finials for these caps.
Brent was nice enough to send us photos to share with you of the roof caps installed and tarnished for about 9 months. Remember that you can click on these photos to get a closer look at them. The cost was $1,000 for both with the finials php, |
.
Click this
photo to go back to the Custom Copper Roof Cap main page. |
.
.
Below is a
photo of our |
We were also a 1997 finalist for this same award. See our referral web page to see how we managed to be honored with this special award |
![]() Homepage |
![]() |
Company Profile |
![]() |
Roof Caps |
![]() |
Chimney Caps |
![]() |
Scuppers |
![]() |
Gutters |
![]() |
Shipping | Contact Info |
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.