The Farrell
Roof
Caps Photos & Details Page Updated 4-1-2007 |
![]() |
Company Profile |
![]() |
Roof Caps |
![]() |
Chimney Caps |
![]() |
Scuppers |
![]() |
Gutters |
![]() |
Shipping | Contact Info |
.
This set of 3 roof caps were made for James Farrell. They have a house with 3 identical 8 sided turrets in Allen Texas. They were fabricated with solid 20oz copper. We had received all the needed info from him in their first letter and were able to lock down the details of this cap in a single reply, so they qualified for the 10% discount for that, and another 10% discount for ordering 3 roof caps all the same design. The quote went from $982.50 down to only $786. That was a savings of nearly $200 off from our normal pricing. These caps are 21" wide with a 20/12 pitch for their 18/12 pitch roof. With the raised spiked corners they are 33.5" wide. It has a safety hem bent under along the bottom edge, which also adds strength. It still has the clear plastic film over the outside of the copper to protect it from finger prints that would make an uneven tarnished look. The cost was: $786 for all
3 caps php (3 part discount from $982.50) |
.
Click this
photo to go back to the Custom Copper Roof Cap main page. |
.
.
Below is a
photo of our |
We were also a 1997 finalist for this same award. See our referral web page to see how we managed to be honored with this special award |
![]() Homepage |
![]() |
Company Profile |
![]() |
Roof Caps |
![]() |
Chimney Caps |
![]() |
Scuppers |
![]() |
Gutters |
![]() |
Shipping | Contact Info |
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.