Design #2 Fancy 20oz Copper Funnel Scuppers Fabrication Photo Page Updated 10-17-2008 |
Company Profile |
Roof Caps |
Chimney Caps |
Scuppers | Gutters | Shipping | Contact Info |
Here is the assembly of a custom rain scuppers I fabricated to better give you an idea of what I can offer you Note: remember that you can click on each picture shown to get a closer look |
|
Here is the scupper design #2 in 20oz copper, with a section of 20oz copper K-5 gutter that is to be shaped into another identical scupper. It is wrapped in a clear protective plastic sheet to peal off when I am ready. |
|
This shows the same piece of K-5 gutter with the bottom bent out and the cut lines drawn on the clear plastic cover. |
|
Here is a close-up of the cut lines on the copper. |
This shows the areas cut out and bent down for fabrication. It also shows the back side cut out and laying just below. |
Here is an angle view of the 3 sides folded together. To the right there is a front view and a look down into the top. |
Below is a photo of our |
We were also a 1997 finalist for this same award. See our referral web page to see how we managed to be honored with this special award |
Homepage |
Company Profile |
Roof Caps |
Chimney Caps |
Scuppers | Gutters | Shipping | Contact Info |
.
.
.
.
.
.
.
.
.
.
.