CBD's Custom Scallop & Soft Scallop Decorative Tail Design for Roof Caps Photo & Price Page

These are some custom copper roof caps I made shown w/ & w/o a finial or weathervane support pipe built in. Many of them may look the same, but have different roof angles or sizes listed and where they were shipped to with the price paid at that time for you to be able to get a good price comparison. *Note: remember that you can click on each pictures shown to see how it was constructed and read more details and get a closer look*
The Davey Turret Cap Oceanside, Oregon (8-08)	The Young Turret Cap Chester, New Jersey (3-08)
36" wide, 8/12 pitch w/steeple cone for finial support pipe, solid brass masts rod roof vent spacer blocks w/SS screen 39" Gwain style finial Cost: $1,283.40 for cap & finial Client pick up	special 11 sided 24" wide, 9/12 pitch w/steeple cone for finial support pipe, solid brass masts rod roof vent spacer blocks w/copper screen 13" Avalon style finial Cost: $602 w/final, crate, & shipping
The Jessum Turret Caps Sammamish, Washington (5-08)	The Gasper Turret Cap *Lehighton, Pennsylvania* (5/08)
pair of roof caps 35" wide + tails (center cap not included) 12 sided & 16 sided 21/12 & 24/12 pitch w/steeple cones for finial support pipes solid brass masts rod raised corners on one soft scallop tails on both roof vent spacer blocks w/SS screen a pair of finials: 39" Fluer De Lis 53" Morgana style Cost: $3,157.50 for both caps & finials Client pick up (saved $82+ - more copper used than quoted)	36" wide + scallop tails 18/12 pitch w/steeple cone for finial support pipe w/solid brass masts rod roof vent spacer blocks w/copper screen 54" Victoria finial Cost: $1,316.50 w/finial, crate, & shipping as quoted (10% off - all info in 1st e-mail & saved another $284.50 for more copper used than quoted)
The Steele Turret Cap Meridan, Kansas (4-08)	The Skiba Turret Cap Langley, BC Canada (3/08)
51" wide + spiked raised corners (largest roof cap to date) 12/12 pitch w/steeple cone for finial support pipe w/solid brass masts rod roof vent spacer blocks w/copper screen 69" Victoria finial Cost: $2,412.50 w/final, crate, & shipping (saved $850+ - more copper used than quoted)	34" wide + scallop tails 21/12 pitch w/steeple cone for finial support pipe w/solid brass masts rod 40" Morgana finial roof vent spacer blocks w/copper screen cost: $891.60 w/finial as quoted Client came here to pick it up (saved $96.60 for more copper used than quoted)
The Pray Turret Roof Caps Penn Valley, California (7/07)	The Dobbins Construction Turret Cap (for their client) Laurie, Missouri (10-07)
30" wide cap, 5/12 pitch roof vent spacer blocks w/copper screen Cost: $297.90 w/crate, & shipping (10% discount for good initial info)	35.5" wide 12/12 pitch w/steeple cone for weathervane support pipe an antiqued copper bass weathervane Cost: $1,318.50 weathervane, crate, & shipping
The Simmon Turret Cap Cary, North Carolina (6/07)	The Bartel Turret Cap Fair Grove, Missouri (6/07)
44" wide w. scallop tails 28/12 pitch w/steeple cone for finial support pipe w/solid brass masts rod roof vent spacer blocks w/copper screen Merlin finial Cost: $1,806.75 w/finial, crate, & shipping as quoted (10% off - all info in 1st e-mail & saved another $175.50 for more copper used than quoted)	18" wide cap + soft scallop tails 32/12 pitch w/steeple cone for finial support pipe w/solid brass masts rod roof vent spacer blocks w/copper screen 39" Victoria finial Cost: $459 w/finial, crate, and shipping as quoted (10% off - all info in 1st e-mail)
The Fischer Turret Cap Baltic, Connecticut (6/07)	The Ober Turret Cap Portland, Oregon (10/07)
40" wide cap w/scallop tails 18/12 pitch w/steeple cone for finial support pipe w/solid brass masts rod roof vent spacer blocks w/copper screen Merlin finial Cost: $1,314.90 w/finial, crate, and shipping as quoted (10% off - all info in 1st e-mail & saved another $177.60 for more copper used than quoted)	36" wide w/octagon tails 12/12 pitch w/steeple cone for finial support pipe solid brass masts rod hidden vent spacer blocks w/copper screening 39" Fluer De Lis finial Cost: $1,013 w/finial Client picked up
The Andreson Turret Cap Benton, Pensulvania (3-07)	The Bogaards 2 Turret Caps Bridgeport, Alabama (3-07)
30" wide 12/12 pitch w/steeple cone for finial support pipe solid brass mast rod Merlin finial roof vent spacer blocks w/copper screen Cost: $952.50 w/final, crate, & shipping (saved $131 - more copper used than quoted)	36" & 30" wide 18/12 & 32/12 pitch w/steeple cones for finial support pipes solid brass masts rods Maple/Oak Leaf patters w/over-sized dangling Acorns 2 tier design w/finial support pipes roof vent spacer blocks w/copper screen Cost: $2,526.30 w/crate, & shipping
The Bell Turret Caps Frazee, Minnasota (1-07)	The Willard Turret Cap Grass Valley, California (3/07)
pair of 2 identical roof caps 24" wide 24/12 pitch w/steeple cone for finial support pipes solid brass mast rods a pair of Avalon finials Cost: $1,095 for both caps w/finals, crate, & shipping	20" wide + tails 24/12 pitch w/steeple cone for finial support pipe w/solid brass masts rod Cost: $555 w/o finial, w/crate, and shipping as quoted (10% off - all info in 1st e-mail)
The Karpel Turret Roof Caps St. Louis, Missouri (10-06)
The upper turret was not uniform and required a roof cap with 3 different sized templates Cost: $2,544 w/crate, & shipping.
The Gentges Turret Cap St Marys, Kansas (10/06)	The Manzar Turret Cap Sea Cliff, New York (3-06)
18" wide + tails 16/12 pitch Cost: $200 (min. charge) including crate & shipping	18" wide 24/12 pitch w/small steeple cone for finial support pipe solid brass mast rod Galahad finial Cost: $432 w/final, crate, & shipping
The Grassham Lumber Turret Caps (for their client) Van Buren, Missouri (9-06)
31" wide 16/12 pitch w/steeple cone for finial support pipe solid brass mast rod a pair of Merlin finials Cost: $1,574 for both w/final, crate, & shipping
The Farrell Turret Caps Allen, Texas (2-06)	The Casteel Turret Cap Jackson, Missouri (10-05)
Set of 3 caps 21" wide + spiked corners 20/12 pitch w/steeple cones for finial support pipes Cost: $786 w/crate & shipping	24" wide cap 14/12 pitch w/steeple cones Cost: $247.50 w/crate & shipping
The Earp Playhouse Turret Caps Phoenix, Arazona (2/06)	The St. George Turret Cap St. Marys, Kansas (12-05)
14" & 9.5" wide caps 20/12 pitch w/small steeple cone for 1/2" finial support pipe copper flag, pole, and crown Cost: $381.30 for set of 2 caps w/flag, crate, & shipping	21.5" wide 28/12 & 75/12 pitch w/small steeple cone for finial support pipe solid brass mast rod 39" tall The cost w/a double discount was only $315 with shipping from $450 for a cap this size with the finial support pipe
*The* Lane Turret Cap Saint Johns, Indiana (10-05)
28" wide, 24/12 pitch Cost: $507.50 w/crate, & shipping (10% discount for good initial info)
*The Hardin Turret Roof Cap* Bolingbrook, Illinois (8-06)	The Farooqui Turret & Gazebo Caps Weston, Massachusetts (3/06)
33" wide cap, 22/12 pitch w/full scallop tails Cost: $516.38 w/crate, & shipping as quoted (10% discount for good initial info)	Hexagon & Octagon caps 36" & 31.5" wide, 8/12 & 15/12 pitch w/steeple cone for finial support pipe w/solid brass masts rod Cost: $1,900 w/finials, crate, & shipping as quoted
The Beaubien Turret Cap Titusville, Florida (10-05)	The Curry Turret Cap Charles, Missouri (8-05)
24" wide cap + tails 14/12 pitch w/steeple cones Cost: $315 w/crate & shipping (10% discount for having all the info we needed in their first letter)	36" wide + spiked corners 14/12 pitch w/steeple cone for finial support pipe wide 5 bend raised corners Cost: $500 w/crate & shipping
The Earp Playhouse Turret Caps Phoenix, Arizona (2/06)	The Morehouse Turret Cap Nova Scotia, Canada (5/05)
14" & 9.5" wide caps, 16 sides, 20/12 pitch w/steeple cone for 1/2" finial support pipe copper flag, pole, and crown Cost: $381.30 w/small Morgana finials, crate, & shipping as quoted	28.5" wide cap 24/12 & 50/12 pitch w/steeple cone for finial support pipe w/solid brass masts rod Merlin finial Cost: $530 + $225 for the finial php without import taxes
The Pair of McHugh Turret Caps Ashland, Misouri (11/05)
2 identical caps 30" wide cap plus tails 18/12 pitch w/steeple cone for finial support pipe w/solid brass masts rod Cost: $1,000 w/Merlin & Avalon finials, crate, & shipping as quoted
The Grace Turret Cap Deltona, Florida (4-05)	The Knuth Turret Cap Chicago Illinois (4/05)
*First* 7 sided cap 36" wide + spiked corners 14/12 pitch w/steeple cones Cost: $437.50 w/crate, & shipping	What more can I say? Just look at it. 13" wide top cap 20" wide middle ring 27" wide bottom ring 24" inside width base 36" tall 42/12 pitch Cost: $700 w/crate, & shipping
The Wilder Turret Cap Arlington, Heights Illinois (11/04)	The Cipriani Turret Cap Baltic, Connecticut (9/04)
33" wide cap, 20/12 pitch w/steeple cone for 1" finial support pipe Cost: $500 w/crate, & shipping as quoted	24" wide + soft scallop tails 20/12 pitch for a 18/12 pitch roof w/steeple cone for finial support pipe w/solid brass masts rod Merlin finial cost: $575 w/finial, crate, & shipping as quoted
The Bower Turret Caps Elizabethtown, Kentucky (8/04)	The Rank Turret Cap Purchase, New York (9-04)
*First client designed tails* 24" wide w/tails, 14/12 pitch base w/ a 32/12 pitch w/steeple cone for sealed weathervane support pipe Cost: $300 each w/crate, & shipping	17 outer piece 24" wide cap plus flame tails = 30" 14/12 pitch to steeple, raise and spiked corners, w/weathervane support pipe Cost: $900 w/crate & shipping
The Boll Turret Cap Jellico, Tennessee (5/04)
30" wide, 12/12 pitch w/steeple cone for weathervane support pipe Cost: $350 w/crate, & shipping as quoted
The Huffmon Turret Cap California (12/03)	The Szakacsy Turret Cap Moorpark, California (7-04)
30" wide cap, 24/12 pitch Cost: $550 w/crate, & shipping as quoted	30" wide cap, 18/12 pitch, w/internal vent w/steeple cone for weathervane support pipe Cost: $500 client picked up
	The Giberson Turret Cap Athens, Georgia *(4/04)*
	33 outer piece 36" wide cap plus flame tails = 48" 12/12 pitch to steeple, w/weathervane support pipe Cost: $1,500 w/crate & shipping